COOL CURL BRILLIANCE
11
NB -
the outer barrel will keep warm with the cool-air function
switched on. The outer barrel won’t reach the same temperature
as the low/medium/high heat settings, but it will remain warm, so
always take extra care when styling.
COOL-AIR FUNCTION
Once the selected temperature has been reached the cool-air
function will turn on automatically. To turn the cool-air function off,
simply press the ‘
’ button twice in short succession. The green
indicator light will continue to flash whilst the cool-air function is
switched off. To turn the cool-air function back on again, simply press
the ‘
’ button twice in short succession.
4. Divide your hair into equal sections & comb
section once more before curling. NB - The
curl result will depend on the size of the hair
section. Smaller sections will give a tighter
curl effect, whilst larger sections will create
a looser curl/waves effect.
5.
Press & hold the barrel release button
(button nearest to the barrel) to open the
plates. Take your desired section of hair &
place between the plates, roughly half a
cm from the roots. (See Fig. 1). Release the
plates by letting go of the button so that
the hair is held securely between the inner
plates.
6. Holding the curler handle in one hand & the
cool tips in the other, turn the curler 180°
back on itself so that the hair is wrapped
once around the outside of the appliance.
(See Fig. 2).
7.
Slowly glide the curler along the length
of the hair from root to tip in a downward
motion. (See Fig. 3), while the cool-air is
Fig. 1
Fig. 2
Fig. 3
