COOL CURL BRILLIANCE
10
OPERATING INSTRUCTIONS
Wash, condition & dry your hair as normal.
Ensure your hair is combed through & tangle-free.
1. Plug your curler into a 230-240V~ suitable power outlet & place on
a heat protective, flat level surface. The red temperature setting
& green fan LED light up immediately. The lights blink & cycle
through 3 times & then turn off.
2. Press & hold the button marked ‘
’ for 1-2 seconds to turn the
curler on. At this time:
•
The curler will automatically default to the medium heat setting
(II = 180°C)
•
The lowest heat LED indicator light will remain red & solid, whilst
the medium heat LED indicator light will flash red, indicating the
curler is heating up
•
The cool-air function LED indicator light will flash green.
Once the selected temperature setting has been reached, both the
red heat setting LED indicator light & green cool-air function LED
indicator light will remain solid.
3. To select a heat setting suitable for your hair type, press the
‘
’ button until the desired heat setting is selected. The indicator
light will flash until the selected temperature has been reached.
Temperature setting is set to low heat setting (I = 160°C).
The 1st red LED flashes, then turns solid when the temperature
has been reached.
Temperature setting is set to medium heat setting (II = 180°C).
The 1st red LED remains solid, while the 2nd red LED flashes,
then turns solid when the temperature has been reached.
Temperature setting is set to high heat setting (III = 200°C).
The 1st + 2nd red LED remains solid, while the 3rd red LED
flashes, then turns solid when the temperature has been
reached.
