INSTRUCTIONS FOR USE
CHARGING THE TRIMMER (FOR CORDLESS OPERATION)
IMPORTANT
: Before using the appliance for the fi rst time, charge
for a full 16 hour continuous charge. Maximum battery capacity
will only be reached after 3 charging and discharging cycles.
After the 3 cycles, the trimmer must still be charged for 16 hours.
In order to maintain optimum capacity of the rechargeable
batteries, every 3 months the trimmer should be recharged for
16 hours.
The charging cord can be placed into the charging stand (as
assembled) or removed and placed directly into the base of the
trimmer.
1. Plug the transformer into a 230/240V power supply.
2. Place the appliance onto the charging stand or plug the adaptor
directly into the base of the trimmer, ensuring that the appliance
is switched off. The charging light will illuminate when the
adaptor is correctly inserted into the trimmer and connected to
the mains power supply.
3. A 16 hour full charge will provide 30 minutes usage time.
INSERTING THE ADAPTOR CORD INTO THE STAND
1. Remove the trimmer from the stand.
2. Hold the stand upside down.
3. Insert the adaptor plug into the hole on the base of the stand
and push fi rmly into position.
4. Route the cord through the back of the base of the stand.
5. Place a thumb on the hinged back cover and push the cover over
the adaptor plug to secure the cord.
VS7183A_NEW.indd 5
VS7183A_NEW.indd 5
11/13/08 8:55:29 AM
11/13/08 8:55:29 AM
