Hot Air Brush ‘N Style
The VS Sassoon Hot Air Brush ‘N Style is a powerful hot air
styler that offers 700 watts for gentle styling and easy control.
It features 2 heat/speed settings for styling all hair types with
tourmaline-ceramic technology™ to leave hair silky and shiny
with reduced frizz.
With a natural bristle brush attachment for curls and shaping,
a thermal brush attachment for adding extra volume and body
and a removable rear fi lter for easy cleaning and maintenance,
the Hot Air Brush ‘N Style is the ideal styling tool for creating
movement, texture and shine.
1. 700
watts
2. 2
heat/speed
settings
3. power
handle
4.
thermal brush attachment
5.
natural bristle brush attachment
6. removable
rear
fi lter
7.
swivel power cord
Additional features:
• Tourmaline Ceramic Technology™
How to use your Hot Air Brush ‘N Style
Wash and condition your hair as usual.
1. Always towel-dry your hair before using the hot air styler.
2. Ensure the switch is set to the off setting before plugging
into a 240v suitable power outlet.
3. There are 2 heat/speed settings:
a. Use the low heat and speed setting as the hair begins to
dry and for precise styling. The low heat is also best for
fi ne or damaged hair.
b. Use the high heat and speed setting for initial drying.
The highest setting is ideal for thick or hard to style hair.
The Attachments:
Thermal Brush –
The thermal brush is a versatile attachment that
allows for:
• Adding extra volume and body for greater
texture and movement
• Smoothing
• Straightening
• Medium to large curls with volume.
The metal barrel on the attachment retains and spreads heat
evenly on the hair section, making it easy to style.
To style using the thermal brush attachment:
1. Divide hair into equal sections.
2. Starting at the front, dry the bottom sections by curling hair
around the thermal brush.
3. Slowly let the brush glide down the hair section to smooth
the hair cuticle.
4. Continue around the nape of the neck and up to the top of
the head until all sections are smooth and curled under.
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, especially when children are
present, basic safety instructions should always be followed,
including the following:
Polythene bags over product or package may be dangerous.
To avoid danger of suffocation, keep this wrapper away from
babies and children. This bag is not a toy.
DANGER:
Unplug unit when not in use. All appliances are
electrically live even when switched off.
WARNING:
This appliance must not be taken into
a bathroom.
• Do not immerse in water or other liquids. Do not use in the
bath, or near basins or other vessels containing water.
• Do not reach for an appliance that has fallen into water.
Unplug immediately.
• Take care to avoid contact between the hot surfaces of the
unit and the skin, paying particular attention to the face,
neck and hands.
• This appliance is not intended for use by young children or
infi rm persons without supervision. Young children should
be supervised to ensure that they do not play with the
appliance.
IMPORTANT:
Always unplug the appliance when not in use or
before cleaning. Do not leave unattended when plugged in or
switched on. Do not place on any heat-sensitive surface and
always allow to cool before storing way.
• Do not use any attachments other than those supplied by
Conair Australia Pty Ltd.
• Use this appliance only for its intended use as described in this
instruction booklet.
• This appliance is not intended for commercial use.
• Never block the air openings of the appliance or place on a
soft surface such as a bed or couch, where the air openings
may be blocked. Keep the air openings free of lint and other
debris.
• Attachments may get hot during use. Allow them to cool
before handling.
• Do not use outdoors or operate where aerosol (spray) products
are being used or where oxygen is being administered.
• Keep the cord away from heated surfaces.
• Do not use an extension cord with this appliance.
• Do not use this appliance if the supply cord is damaged. In the
event of damage, discontinue use immediately and contact
your dealer for instructions on returning it for examination
or exchange.
• After use do not wrap the cord around the appliance as in
time this may cause the cord to fracture. Coil cord loosely by
the side of the appliance in storage.
• Never drop or insert any object into any opening
• Always ensure that the voltage to be used corresponds to the
voltage marked on the unit.
• For additional protection, the installation of a residual current
device (RCD) with a rated operating current not exceeding
30mA is advisable in the electrical current circuit supplying
the bathroom. Ask your installer for advice.
2
5
4
6
7
3
07FB0901_VS2014/2A_IB.indd 3-4
07FB0901_VS2014/2A_IB.indd 3-4
11/5/07 11:46:57 AM
11/5/07 11:46:57 AM
