VS Sassoon THETRIMBUDDY VSM702A, Tool Tips

Page: 7 / 16

7
THE TRIM BUDDY / TOOL TIPS
USING THE COMB GUIDES
The Trim Buddy comes with 2 comb guides for precise trimming of your neckline,
sideburns & eyebrows.
SMALL COMB - 4MM For trimming sideburns
LARGE COMB – 7MM For trimming eyebrows
ATTACHING A COMB GUIDE
To attach a comb guide, ensure that the trimmer is switched off.
Slide the comb guide over the top of the linear trimming blade. When attaching
the comb guide, make sure that the teeth of the comb and the linear trimming
blade are facing in the same direction and that the top of the comb guide is even
with the top of the trimmer.
REMOVING A COMB GUIDE
To remove the comb guide, ensure the appliance is switched off.
If you want to completely remove hair, use the linear trimming blade without the
comb guide. The comb guides are great for pre-trimming and at-length trimming.
CHANGING THE TRIMMING BLADES
To remove a trimming blade, turn the head counter clockwise until the
‘I’ mark aligns with the “•” mark, then lift the head gently (Fig. 2).
To attach a trimming blade, align the “I” mark on the head with the
“•” mark on the body and then turn clockwise until the “I“ marks are
aligned and locked into position (Fig.3).
CAUTION: WHEN REMOVING THE BLADE OR COMB
GUIDE ATTACHMENT, BE CAREFUL NOT TO CUT
YOUR FINGERS AS THE BLADES ARE SHARP.
Fig.2 Fig.3