2. Plug the AC power adaptor directly into the base of the trimmer.
3. Plug the AC power adaptor into a 100v – 240v power supply.
Switch the power on, and the trimmer can now be used in cored
operation.
Note: If battery power is weak, wait about 2 minutes before
switching the trimmer on.
NB – NeVer USe tHe trIMMer IN CorDeD oPerAtIoN IF YoU
INteND to USe tHe trIMMer IN tHe SHoWer or UNDer rUNNING
WAter, AS tHIS WILL CAUSe INJUrY.
AttACHING AND reMoVING ACCeSSorIeS
Make sure that the unit is switched off before changing the
trimmer head or accessories.
To attach a head, fit the base of the accessory onto the unit
pressing it until you hear a click.
To remove a head, hold the handle of the unit in one hand and
push up on the head with your free hand to remove it (fig.2).
To remove the body comb guide, push up one side of the comb
(fig.3).
fig.2
fig.3
