CleaNiNG aNd MaiNteNaNCe
To ensure long lasting performance of your clipper, clean the
blades and unit regularly.
After each use, clean the clipper as follows:
1. Remove the comb guide after use. Rinse under running water
and dry thoroughly before storage or use.
2. To make cleaning easier, the clipper blades can be removed.
Make sure the clipper is turned off. Hold the clipper with the
blades pointing up and remove them by pressing the top of the
blade. (Fig. 8)
3. Using the cleaning brush, brush and blow away any remaining
hair.
4. After cleaning, switch the appliance on, and oil the blades by
adding a few drops of the oil supplied over the blades. Only
use the lubricating oil supplied with this appliance as this is
specifically formulated for high speed clippers and does not
evaporate or slow the blades.
5. To clean the clipper unit, wipe with a damp cloth and dry
immediately.
6. Do not use any liquid cleaners or harsh corrosives on the clipper
unit.
iMPortaNt – Never place the blades under running water, as this
can ruin the cutting performance of the blades. Always use the
cleaning brush to clean the clipper head and blades.
Fig. 8
