iMPortaNt: Always unplug the appliance when not in use or
before cleaning. Do not leave unattended when plugged in or
switched on. Do not place on any heat sensitive surface and always
allow to cool before storing away.
• Do not use any attachments other than those supplied by Conair
Australia Pty Ltd.
• Do not use the appliance with damaged or broken attachment
combs or with any teeth missing from the blades, as injury may
occur.
• Use this appliance only for its intended use as described in this
instruction booklet.
• This appliance is not intended for commercial use.
• Do not place appliance on any surface while it is operating.
• Do not use outdoors or operate where aerosol (spray) products
are being used or where oxygen is being administered.
• Never drop or insert any object into any opening
• Do not use the appliance if it is damaged. In the event of
damage, discontinue use immediately and contact your dealer for
instructions on returning it for examination or exchange.
• Always ensure that the voltage to be used corresponds to the
voltage marked on the unit.
• For additional protection, the installation of a residual current
device(RCD) with a rated operating current not exceeding 30mA
is advisable in the electircal circuit supplying the bathroom. Ask
your installer for advice.
