VS Sassoon BLOWOUT BESTIE, Instruction Booklet

Page: 10 / 20

10
SHINE LUSTRE BLOWOUT BESTIE
OPERATING INSTRUCTIONS
Wash, condition & towel dry your hair.
Ensure your hair is slightly damp, combed through, & tangle-free.
1. Make sure the switch is set to the off (0) setting before plugging
into a 230-240V~ suitable power outlet.
2. Divide your hair into equal sections, between 3cm - 5cm wide,
depending on your hair type, length & thickness. The number
of sections will depend on how much hair you have. For hair of
average thickness, part your hair from ear to ear, creating a top &
bottom section. Clip the top section out of the way. Roughly part
the bottom section down the middle, bringing each side in front
of your shoulders. You’ll work on each side separately.
3. To turn on, twist the power switch to the heat setting suitable
for your hair type. There are 2 heat settings, plus a cool setting:
• Twist the switch to the high heat setting (II) if you have medium
to thick hair
• Twist the switch to the low heat setting (I) if you have delicate,
fine, bleached or coloured hair
• Twist the switch to the cool setting ( ). Use the cool setting on
warm hair to set your style.
4. The oval-shaped barrel allows you to use 2 different styling
processes:
a) Wrap & release from the ends, or;
b) Blow-out boost from the roots.
a) To use the wrap & release from the ends process:
• Take a section of hair that’s approximately 3cm wide. Place the
oval brush at your ends & holding the end of the attachment, roll
the brush up the length of your hair until the barrel is at your roots,
wrapping the hair around the brush in the process.
• Wait 10 to 20 seconds, then slowly wind the brush downward,
unraveling your hair in the process.
• Continue to repeat the wrapping & releasing process on all layers