4.2.3 Cameras with MPE Garry Micro-T Connector
Note
The following instructions apply to cameras equipped with a MPE Garry Micro-T
connector only. These are
• all single-sensor cameras in PRO design VRm(F)C-X.
It is assumed that you have ordered the optional “VRmC-X PRO Interface Cable”
(
Â
2.3 on page 13).
Connecting the camera:
1.
Connect the supplied cable with the MPE Garry Micro-T plug to the camera’s
receptacle (
Â
Fig. 6 on page 11).
2.
The other end of the cable splits into 0.1” receptacles for trigger and strobe and a
receptacle for an external power supply. Connect trigger and strobe, if required.
f
View the cable plan for a detailed description (
Â
7.3 on page 36).
3.
Connect the USB cable to the camera’s USB port.
4.
Continue with
Â
4.3 on page 23 and read the information on power supply.
1
11
12
21
...
Fig. 14: VRmC-X PRO interface cable for PRO cameras
1
MPE Garry Micro-T 387-1-021-ZS0, to be plugged into camera receptacle
2
Switchcraft PC722A receptacle for 5 V power supply
3
Receptacles for 0.1” connector (7 pieces)
USB Cameras – User Guide
22
USB Components
Hardware Installation
Summary of Contents for USB Camera
