VRL PAR-363, Manual

Page: 6 / 11

6
3. CHANNEL FUNTIONS
DISPLAY FUNCTION
VALUE 001-506 DMX address
MODE M-DM DMX mode
M-AU AUTO mode
Notes: Only one lamp can be set as Master and the left are
Slaves (Slaves set to DMX mode with DMX address “001”). Do
not connect the Slaves lamp with controller.
M-SO SOUND mode
Notes: Only one lamp can be set as Master and the left are
Slaves (Slaves set to DMX mode with DMX address “001”). Do
not connect the Slaves lamp with controller.
PRCO PR1~8 8 built-in programs
Pr1-4 means skip
Pr5-8 means fade
SPCO SP01~15 Auto speed SP01: 0.1sec/step, SP15: 10secs/step
TEST ALL Check all channels with motors
RED Check red channels
GREEN Check green channels
BLUE Check blue channels
DSPL STND Display bites normally
REV Display bytes upside down
REST REST/ON Reset
(Press ENTER button to enter into REST menu and the screen
reads flashing “REST”. Then press UP/DOWN button and the
screen reads flashing “ON”. If you press ENTER again, the light
engine resets again)