5
2. LAMP BODY INSTALLATION
Notes: do not install it nearby the curtain or flammable materials.
Only for indoor use.
OPERATION
1.SET DIPSWITCHES
■
Each fixture occupies 6 DMX channels.
■
DMX 512 signal can control multi-fixtures together, however you must set the DMX
address of each lamp first. Different DMX address will lead to different movements.
■
You can set DMX address from 1~506 on the multi-function display panel.
■
Switch on power supply and after finishing resetting, the panel will show 001,that is to
say DMX address is 1 and the first lamp has been controlled by 1~6 channels. In turn the
second fixture has been controlled by 007~012 channels. (When panel shows 001,press
UP button until it shows 007.Then just press ENTER button). In the same way, the third
fixture has been controlled by 013~018 channels and the panel shows013.
■
Through this method, you can control multi-fixtures to perform different movements.
2
.
DMX CHANNEL SUMMARY
Summary of Contents for PAR-363
Page 1: ...1 ...
