Preparing MCP combo before Flight
Step 1
:
Initial check up
Before flight with MCP combo, please check the followings are done
A. Install of VRiSim.
* Check that “Install USB-Serial Driver” is checked or not.
B.
Confirm that proper version of FSUIPC is installed or not
(FSUIPC v3.80 or later for FS9 / FSUIPC v4.26 or later for FSX)
C. Confirm the USB connection.
* Check that the USB port of your computer is dead or not
* Check that if you use USB hub, be sure that the USB hub is USB 2.0 compliant.
D. Confirm that “Panel Installer” is executed or not.
Step 2 : Run flight simulator (MSFS9 / MSFSX)
A. Run flight simulator (MSFS9 / MSFSX).
B. Select Aircraft.
18
B. Select Aircraft.
Step 3 : Run panel linking application software “VRiSim”
.
