Software Installation
Driver and application software “VRiSim” is installed to make MCP Combo panel work in the PC.
VRiSim is application software managing VRInsight's flight simulation hardware panels. Multiple
hardware panels can be used with single instance of VRiSim. To reduce distributing file size,
software installer is supplied as divided package; base-package and device specific module package.
The base-package installs only VRiSim and Panel Installer utility.
Installer executable is divided into base package and device specific modules. VRiSim is included in
the base-package setup installer, "Install_VRiSim.exe".
Base-Package Installer:
The base-package installer can be found in the supplied DVD,
\VRiSim\Install_VRiSim.exe
Device Specific Module Package Installer
The MCP Combo module installer can be found in the supplied DVD,
\VRiSim\Install_MCP
Or downloaded at VRInsight's web-page,
http://www.vrinsight.com
NOTE
: Software installation is explained “VRiSim.pdf”. You can find this document file at program
folder of “VRinsight”
folder of “VRinsight”
Quick Start
VRiSim is new software developed for interfacing VRinsight’s hardware unit to Microsoft’s Flight
Simulator. After installation of software, a short-cut icon will be created on your desk-top;
VRiSim.
Running VRiSim
Double-click “VRiSim” short-cut icon to run. “VRiSim” search all VRinsight hardware units and list
unfounded device(s). Device searching process could be taken several minutes. Following image is
showing that two device, MCP Combo II and GPS-5 are found and listed by “VRiSim” software.
“VRiSim” manages multiple devices.
16
