VRinsight MCP Combo II - Airbus FCU, Operating Manual, Page: 31 / 49

VRinsight
MCP Combo II
– Airbus FCU -
Copyright ©2012 VRinsight
www.vrinsight.com
4. Connecting VRInsight’s Flight Panel/Re-install driver software
Plug MCP Combo II – Airbus FCU - USB connector into PC’s USB port. As new device is
connected to PC, it’ll try to install device driver software.
Already the driver software was installed during
VRiSim software installation, the new device
is recognized as “USB Serial Port(COMx)”. Following picture is an example of success
message for the new VRinsight’s flight panel hardware that is recognized as COM3.
When it fail to install driver software, re-install driver software.
USB-Serial port driver software can be re-installed separately to the
VRiSim software
installation. Driver installer can be found where the VRiSim is installed (i.e. C:\Program Files
(x86)\VRInsight\Drivers ). It is “CDM20XXX_Setup.exe” named with software version.
Re-installation of USB-Serial driver is simply to run this installer. Disconnect all VRInsight’s
flight panel from the PC before running the driver software installer. Temporarily a window is
prompted showing “Installing driver…….” and ended with completion message. This prompted
window will be closed as its completion.