VRinsight MCP Combo II - Airbus FCU, Operating Manual, Page: 11 / 49

VRinsight
MCP Combo II
– Airbus FCU -
Copyright ©2012 VRinsight
www.vrinsight.com
5. Quick Start
VRiSim is new software developed for interfacing VRinsight’s hardware unit to Microsoft’s Flight
Simulator. After installation of
VRiSim
software, short-cut icons will be created on your desk-top;
VRiSim . VRiSim is used in replacing with SerialFP2 software for MCP Combo II - Airbus FCU -.
NOTE : Section 4. Software installation should be done.
Step 1. Run Flight Simulator 2004 / Microsoft Flight Simulator X
Run Flight Simulator 2004 / Microsoft Flight Simulator X and select an aircraft. Press “FLY NOW”.
NOTE : Be sure that the selected aircraft should be configured through the Panel Installer in
advance.
Step 2. Run
VRiSim
Double-click “
VRiSim ” short-cut icon to run. “ VRiSim ” search all VRinsight hardware units and list up
found device(s). Device searching process could be taken several minutes. Following image is
showing that two device,
MCP Combo II - Airbus FCU - and u-JetPit are found and listed by “ VRiSim ”
software. “ VRiSim ” manages multiple devices.
NOTE : In the VRiSim software, FCU-Combo/Airbus means MCP Combo II - Airbus FCU -