Welcome to your new Propeller sensor attachment. This guide is for the
2NET2 Communicator
(cell tower and house display). For 2NET Communicator
(signal bars and house display) instructions, please flip the page over. If you have
any questions or in need of assistance, do not hesitate to call us at
1-800-860-4230
.
Ellipta Propeller
Vitals Monitoring
Quick Install
®
1
Unpack the enclosed 2Net2 Communicator and plug into a power outlet.
Wait until the
lights on the Communicator indicate the hub is ready to transmit readings.
POWERED
by Qualcomm Life
BY
TM
Sending reading to
the Care Center
flashing
Receiving reading
from your medical
device(s)
flashing
Received invalid data.
Retake reading when
the lights turn green
Cannot reach a
strong signal
flashing
Sent reading to the
Care Center
Received reading
Ready to recieve
reading
Resending reading
2Net2 Communicator
2
Clip the sensor on top of the inhaler.
It is critical that the sensors are
attached to the correct medications
.
Reminder:
when it’s time to refill, remove
the sensor and place on your new inhaler
DO NOT discard the sensor.
3
Take your medication as prescribed
with the sensor on. After inhaler use
the lights on your Communicator will
flash indicating your information is
being sent to the Vitals Monitoring
Team.
After the first use
please call our
Vitals Monitoring Team at
1-888-875-0976
to ensure your
readings were received.
