Vremi VRM050696N, Manual

Page: 8 / 24

Portable Air Conditioner | 8
Installation Instructions
In the Cool Mode the appliance must be placed close to a window or opening so that the
warm exhaust air can be ducted outside.
First position unit on a flat floor and make sure there’s a minimum of 12” (30cm) clearance
around the unit, and is within the vicinity of a single circuit outlet power source.
1. Extend either side of the hose (Fig.1) and screw the hose inlet (Fig.2).
2. Extend the other side of the hose and screw it to the hose outlet (Fig.3).
3. Install the hose inlet into the unit (Fig.4).
4. Attach the hose outlet into the window slider kit and seal (Fig.5&6).
Window slider kit has been designed to fit most standard vertical and horizontal window applications. However, it
may be necessary for you to modify some aspects of the installation procedures for certain types of windows. The
Window slider kit can be fastened with screws.
NOTE:
If the window opening is less than the minimum length of the window slider kit, cut on opposite side of the hole
to fit the window opening. Never cut the hole on Window slider kit.
EXHAUSTING HOT AIR