10 · Cleaning & Maintenance ·
Air Purifier
Air Purifier
· Cleaning & Maintenance · 11
Cleaning & Maintenance
CLEAN THE AIR PURIFIER
FILTER REPLACEMENT (CONT.)
Regularly clean the inside and outside of the body to prevent dust from collecting on the
inside and outside.
1. Wipe away dust with a soft dry cloth from the body of the appliance.
2. Clean the air inlet and the air outlet with a soft dry cloth.
NOTE
· Always unplug the appliance before you clean it.
· Never immerse the appliance in water or any other liquid.
· Never use strong or flammable cleaning agents such as bleach or alcohol to clean
any part of the appliance.
· The Filter is not washable.
FILTER REPLACEMENT
1. Switch off the appliance and unplug it.
2. Replace the Air Filters refer to the
"
Before First Use"
section (p. 8).
Only Vremi® branded Filters should be used, the following Filter SKU numbers are
compatible:
VRM010277N (1-pack)
VRM010278N (2-pack)
It is recommended to change the Air Filter every 6–8 months. However, you may need to
change your Filter sooner or later depending on how often you use your Air Purifier. It is
important to watch out for the following signs of expired Filter:
· Increased operating noise
· Decreased airflow
· Clogged Filter
· Increased presence of odors
NOTE
· The environment in which the Air Purifier being used may also extend or shorten the
lifetime of the the Air Filter. Using your Air Purifier in an environment of relatively high
pollution may mean you will need to change the Air Filter more often.
· If the air pollution in your environment is very high, there is a possibility that the Filters
may not be completely effective and may need to be replaced before lights up.
· Remember to reset the Air Purifier after changing the Air Filter.
Reset Filter’s Lifetime
The Filter lifetime should be reset if lights up. After replacing the new Filter, you need to
reset the Filter.
1. Plug in the Air Purifier and turn it on.
2. Press and hold for 3 seconds.
3. Release and the light will turn off, indicating that the reset is complete.
Filter Replacement Force Mode
When using the Air Purifier in an environment of heavy pollution, the lifespan of the Air
Filter may be significantly reduced. You can change the Filters even if does not light up.
Follow the steps below to perform a hard reset.
1. Replace the Air Filters.
2. Plug in the Air Purifier and turn it on.
3. Press and hold for 3 seconds, and it will light up.
4. Press and hold again for 3 seconds, and it will turn off. The reset is now complete.
STORAGE
Unplug the power cord, wipe the machine clean, put the appliance in the packing bag, then
put it in a dry place.
ENVIRONMENT
Do not throw away the appliance with the normal household waste at the end of its life, but
hand it in at an official collection point for recycling. By doing this, you help to preserve the
environment.
Cleaning & Maintenance
