2-
Aileron servo installation
Extension cord
Cut away the covering of the wing bottom where the
aileron servo goes.
Pull the thread out of the wing and connecting the aileron
servo extension cord to one end of the thread.
Pull one end of the thread (on the top and near the wing
root) to install the aileron extension cord into the wing.
3-
Aileron linkage / Querruderanlenkung
AILERON SERVO
WING BOTTOM-VIEW
WING BOTTOM-VIEW
Attach the control horn on the aileron with 2x15mm screws.
Screw the clevies halfway on the theared end of the aileron
push rod. Attach the push rod to the aileron horn. Mark the
position where the push rod will attach to the servo arm.
Cut off the excess length of the push rod
Plastic control horn
..........2
...................4
..........2
Included with the
radio set.
X
X
3mm set Screw
2 mm
Aileron pushrod
D=5/64”(2mm)
Ensure that the servo is centered. If necessary, adjust the
metal clevis so the aileron is also in the neutral position.
Extension cord
WING BOTTOM-VIEW
3-
Aileron servo installation
Cut away only the covering
Connect the aileron extension cord to the
aileron servo and secure with adhesive tape
before install the aileron servo on to the wing.
Adhesive
tape
Do the same way with second aileron
servo.