CESSNA 208
12-Horizontal stabilizer
! Securely glue together. If coming off during fly,
you lose control of your air plane.
CA
Apply CA glue
both sides.
(thin CA)
CA
Apply thin CA glue into the slot where
the fuselage meet the horizontal stabilizer.
Install the horizontal stabilizer onto the fuselage and adjust the alignment as described in section 11.
Note: it is important to ensure that the horizontal stabilizer is also level in regards to the fuselage.
Apply the thin CA along the area where the covering was removed in the previous step and to the
fuselage where the horizontal stabilizer mounts .
Carefully, push the vertical fin into the
slot on the fuselage as shown.
Summary of Contents for CESSNA 208
