i2 MICRO iCON USER MANUAL
VPC
07/23/21
For more information visit vpc.com
14
PCB ASSEMBLY
84 PIN HEADER, PART # 510 109 204 • 60 PIN HEADER, PART # 510 109 206
MOUNTING BRACKET, PART # 310 113 562
TOOLS REQUIRED
Phillips Head Screwdriver
ASSEMBLY INSTRUCTIONS
1. Assemble two headers to the PCB. See next page for
recommended PCB layout.
NOTE:
To ensure a secure connection without damaging the PCB,
the board must be properly supported between the mounting
holes to distribute pressure evenly. Otherwise, the insertion force
may be high enough to damage or break the board. Reference
VPC part # 910 121 199 if a tool is needed.
2. Using the Phillips head screwdriver, secure the headers and
mounting bracket (Part # 310 113 562) to the PCB using the
supplied 2 mm screws (
Figure A
).
3. Secure the receiver to the mounting panel (
Figure B
) following
the recommended panel cutout (see page 4 of this user manual).
4. Using the Phillips head screwdriver, press the PCB and headers
onto the receiver and secure the mounting bracket to the
receiver using the supplied captive 2-56 screw (
Figure C
).
Figure A. Secure headers and mounting bracket to PCB.
Figure B. Secure receiver to mounting panel.
Figure C. Secure mounting bracket to receiver.