9050 USER MANUAL
VPC
07/19/2022
For more information visit vpc.com
7
WHEN MOVING THE RACK OR ATTACHING AN ITA, ENSURE
THE SLIDES ARE FULLY COLLAPSED AND RECEIVER IS
SECURED TO RACK WITH .190-32 UNF SCREWS.
Figure G.
Figure F. Attach receiver mounting flanges to the inner slide rails.
A
SLIDE
RELEASE TAB
INNER SLIDE
Figure E.
4.
Remove the innermost section of each slide by extending the slides
fully, depressing the blue tab, and continuing to extend the inner
sections of each slide until it is free from the slide assembly (
Figure E
).
5.
Install the included instrument brackets. The shorter bracket is to
be installed for use with the top tier of slides and the longer on the
bottom. To install, follow the instrument bracket instructions also in
this User Manual.
9050 INSTALLATION
1.
Install inner slides back into slide kits in the rack.
2.
Attach the receiver mounting flanges to the inner slide rails on both
tiers of slides using (6) 8-32 button head screws for each tier. On the
top tier use the taller of the two sets of flanges, included with the
receiver. Ensure that the mounting surface portion of the flanges are
directed outward as viewed from the front (
Figure F
).
3.
Install the receiver mounting flanges on the top tier slides, to the back
of the receiver using the (4) receiver rack mounting screws provided
(
Figure G)
. Then attach the flanges on the bottom tier to the receiver.
4.
Now, fully tighten the slide mounting screws. First tighten the front
mounting screws, then tighten the rear slide mounting screws
(Figure D)
.
INSTALLING 9050 WITH SLIDE KIT (CONT’D)
PART # 310 104 402, 310 104 483, 310 113 451, 310 113 411, 310 113 500