9050 USER MANUAL
VPC
07/19/2022
For more information visit vpc.com
11
INSTALLING KEYBOARD TRAY (CONT’D)
PART # 310 113 439
Figure A.
INSTRUCTIONS
1.
Attach the keyboard mounting brackets to the existing platform
mounting brackets using with the supplied 8-32 flat head
screws, nuts, and lock washers. Align the keyboard mounting
brackets with the 3 screws that extend beyond the platform
mounting bracket (
Figure A
).
2.
Use 6 of the 8-32 x .38 button head screws to attach the 12
"
keyboard kit slides to the inner side of the keyboard brackets.
The manufacturer stamped identification on the slides should
be placed toward the rack. Fully extend the keyboard slides to
access the hole locations (
Figure B)
.
3. Insert the keyboard into the keyboard tray. Wrap the plastic
strain relief around the cable near the back of the keyboard and
press into the hole provided on the keyboard tray.
4. Fully extend the 12” slides and mount the keyboard tray (
Figure
C
). Floating, self-locking fasteners in the keyboard mounting
brackets prevent the screws from backing out. This creates a
noticeably snug fit when tightening the screws.
Figure B.
Fully extend the keyboard slides to access the mounting holes for the self-
locking fasteners.
Figure C.
The different hole patterns allow for variations in the overall position of the
keyboard.
PLATFORM MOUNTING BRACKET
MOUNTING BRACKET, LEFT
SUPPLIED 8-32 SCREW,
LOCKING WASHER, AND NUT
BOTTOM VIEW
SELF-LOCKING FASTENERS
BOTTOM VIEW