Rear VCP Connections
Figure 13
1) Fuse- 2 Amp Fuse Used
2) Antenna In- External antenna hook-up
3) Video Out- To Monitor or Video
4) Audio Out- To Moinitor or Video
5) RF Out- Channel 3 or 4 output to Monitor
6) Channel Select- Selects setting for channel 3 or 4 selection, depends on
area you live in.
7) Power In- Dual input for connection to barrel connector
8) DC 12V- Dual input for connection to 4-pin connector
Front VCP Features
Figure 14
1) Power- This button powers the VCP “on” and “off”.
2) Stop/ Eject- This button stops the tape and a second push ejects the VCP
tape.
3) REW- This button rewinds the tape from either “play” or “stop”.
4) Play- This button sets the tape into play mode.
5) FFWD- This button fast forwards the tape from either “play” or “stop”.
6) CST- This light indicates whether a tape is present in the VCP.
7) DEW- This light indicates moisture present in VCP due to weather conditions.
8) Remote Sensor- This picks up the IR signal from the remote.
15
