Power by built-in 3.7V lithium polymer battery, if the OLED screen
display low battery or
is flash, charge your remote
transceiver. While the battery of the Remote Transceiver is under
the battery charging, you can push the ”
” button to check
charging condition.
Optional AC Power Supply
If you have optional AC POWER SUPPLY / AC ADAPTOR (Output
Voltage: 4.2VDC – 5.5VDC and with same USB plug), then you can charge
the battery indoors.
While the battery of
the Remote
Transceiver is under
charging.
Push the
button; the
screen will display
Battery charging.
Charge Input
USB Input
C. MAIN PAGE:
1. Press
the button, the screen will display main page.
2. While the icon flashing on the OLED screen, press the button, the OLED screen will display the
detail of the flash icon, the display sequence of flash icon as follows: TRIGGERED / ENGINE
RUNNING / COUNT DOWN TIMER / TIMER START / ALART TIMER condition.
While the
TRIGGERED
icon
flash
.
Push the
button to display
triggered area.
.
While the
icon flash
Push the
button
5
