Voxtel C100, Quick Start Manual

Page: 6 / 72

6
6.6 Mute Function
t
During a call press the mute button .
>When the mouthpiece is muted, the person at the other end of the call cannot hear you out you
can hear his side.
t To get back to the call, press the mute button again.
6.7 Use on PBX
If you are using your Voxtel C100 phone on a PBX, and the PBX user guide tells you to press recall or
flash;
t Press the recall button on your phone.
6.8 Inserting a pause in the dialling sequence
For some switchboard systems, an access number must be dialled (usually an 0 or 9) to get another
dial tone and an outside line.
t Press the pause button immediately after the access number, a pause of about 3.6 seconds will be
entered, and the desired number can be dialled immediately.
Note:
If you use the , the pause will be included automatically.
t Press the pause button to insert a pause when storing numbers in memories, if a pause is required.
6.9 Storing a number in M1-M8 one-touch memories
t
Lift up the handset, press the store button .
t
Key in the telephone number you wish to store.
>Up to a maximum 32 digits.
t
Press one of the M1-M8 buttons - to store the number in the selected memory.
>If you try to store more than 32 digits, only the first 32 digits will be saved.
6.10 Storing a number in (0-9) two-touch memories
t Lift up the handset, press the store button .
t Key in the telephone number you wish to store.
>Up to a maximum 32 digits.
t
Press store button and then one of the 0-9 buttons to store the number in the selected memory
location.
t
Replace the handset on the base unit cradle.
6.11 Dial out a one-touch memory number
t Lift up the handset, press the M1-M8 button - for the selected number.
>The number dials automatically.
6.12 Dial out a (0-9) two-touch memory number
To dial a number stored in a two-touch memory (0-9)
t Lift up the handset.
t
Press the memory button .
t
Key in the memory location number (0-9) for the selected number.
>The number dials automatically.
Warning:
All one-touch, two-touch and redial memories will be erased if the phone is disconnected from the
telephone line for longer than about 2 hours, and they will need to be stored again, if required.