P20
41
ENGLI
SH
STEP 1 :
Hold the TIME button
5
for three second to enter the utility menu.
STEP 2 :
Turn the TRACK KONB to select different function setup.
STEP 3 :
Press the TRACK KONB to enter the setup mode for each function.
STEP 4 :
Turn the TRACK KNOB to select desired function and adjustment.
STEP 5 :
Press the TRACK KNOB to exit single function setup mode.
STEP 6 :
Save and exit utility menu. Turn the TRACK KNOB to 7.SAVE&EXIT and press the TRACK KNOB¸ the
display indicates “SAVING”. When the player finish the saving process and exit the utiltiy menu.
NOTE
: Anytime you can exit the Utility Menu just press the TIME button. However, the modifed setting
would not be saved.
1. Playlist -
Normal / Title/ Artist / Album/ Genre (for USB only)
The VOXOA TUNEBOX can generate “Playlist” for USB device. You can adjust various criteria in order
to filter track in this setting.
You can turn the TRACK (SEARCH) KNOB to select “Normal / Title/ Artist / Album/ Genre (for USB
only)” and press the TRACK knob again to memorize your setting and exit the utility menu.
Normal
: This is the default setting. The tracks are played corresponding to the established hierarchical data
structure.
Title :
It is possible to continuously and alphabetically browse track database through the title structure.
Artist:
It is possible to continuously and alphabetically browse track database through the Artist’s name structure.
Album:
It is possible to continuously and alphabetically browse track database through the album structure.
Genre:
It is possible to continuously and alphabetically browse track database through the track’s genre structure.
2. Sleep Time -
5~120min, No Sleep.
3. Line Setup -
To setup the Dot Matrix Information Display mode.
- Dis =
0.5~12.0 sec. (LINE NAME start/stop time adjustment).
- Run =
50~2000 msec. (LINE NAME move time adjustment).
4. Bit Rate -
Display MP3 bit rate ON/OFF.
5. Version -
To display the firmware version.
- CON : XX(Control version).
- SER : XX(Servo version).
- DSP : XX(DSP version).
6. Load Default -
Press TRACK Knob to enter load defaults.
7. Exit & Save =
Save the setting and exit utility menu.
Utility Menu
