voxicon VXD-P44UWHD, User Manual

Page: 6 / 11

11 10
7.5- HDMI Connectivity
Type-C Cable (included)
HDMI OUTPUT
PC
PC
HDMI Cable (not included)
In order for the monitor to receive HDMI signals from the computer, use the HDMI
cable to connect the monitor to the computer.
DP Cable (included)
7.4- DP Connectivity
In order for the monitor to receive DP signals from the computer
，
use the DP cable to
connect the monitor to the computer.
TYPE-C OUTPUT
PC
AUDIO DP HDMI 1 HDMI 2 Type-C USB A USB A USB B
AUDIO DP HDMI 1 HDMI 2 Type-C USB A USB A USB B
AUDIO DP HDMI 1 HDMI 2 Type-C USB A USB A USB B
8. Basic Operation
2. Connect the other end of the cable to the corresponding connector on your monitor.
HDMI Connector
DP Connector
3. Connect the power cable to your monitor then connect the other end to your power
source. It is recommended that you use a surge protector with adequate voltage if
a wall outlet cannot be reached directly.
4. Locate the power button on the monitor and press it to turn the monitor on.
1. Insert one end of the DP cable into your PC's graphics card. A HDMI cable or
Type-C cable may also be used.
Adaptive-Sync
This feature is off by default. To activate, you must have hardware with Adaptive-Sync
capability, a DP or HDMI cable, and the latest graphic drivers. After connecting your
computer and monitor with a DP or HDMI cable, you may receive a prompt to enable
the feature on your computer. If you do not, you may need to enable the function in
your graphics card menu. See your graphics card manufacturer’s documentation for
instructions.
Solid blue light indicates power is on and the monitor is operating normally. Flashing
blue light indicates no video source, no horizontal or vertical signal has been detected
or power is low.Please ensure your computer is on and all video cables are fully
inserted and/or connected.
9. Indicator Light
Indicator Light
AUDIO DP HDMI 1 HDMI 2 Type-C USB A USB A USB B