编程音色的显示屏会提示“- -”大约一秒钟，然后提示“- -”。如果你在舞台
上进行调节，我们建议你选择这种方式。
2. Play a single note on your guitar, and tune the string
approximately so that the desired note name appears in the
program display.
The note name is shown as follows.
2、在你的吉他上演奏一个单音，同时对琴弦进行调音，直到正确的音符出现在
音色的显示屏上。
音符的名称会按照下列方式显示。
3. While watching the LEDs of the program section and tuner
section, tune the guitar string precisely.
Tune so that only the center LED is lit.
The LEDs at the right will light if the pitch of your guitar is
sharp, and the LEDs at the left will light if it is flat.
3、通过观察编程音色部分和调音器部分的 LED 指示灯，可以精确的对吉他进行
调音。
调音一直到中间的 LED 指示灯被点亮即可。
4. When you’ve finished tuning, press the UP or DOWN pedal.
HINT: You can also press the EXIT/TUNE switch to return to
the previous operation.
4、当你完成了调音，点击上或下踏板。
提示：你也可以点击退出/调音开关返回前一步的操作。
