b. 调制/延迟选择器
这里选择调制效果，延迟效果，或者其它效果器的类型。
如果效果类型是关闭的，转动该选择器就会打开效果类型。
c. EDIT knob
This adjusts the parameters of each effect.
You can use this knob to adjust two different parameters, EDIT 1 or EDIT
2. The specific parameters that are adjusted will depend on the selected
effect. For details, refer to “Mode/Delay types” (p.20).
. EDIT 1: turn the EDIT knob
. EDIT 2: hold down the TAP switch and turn the EDIT knob
c. 编辑旋钮[EDIT]
这里调节每种效果器的参数。
你可以通过该旋钮调节两种不同的参数，EDIT 1 或者 EDIT 2。根据所选择的效
果不同，相应的参数会被进行调节。如果需要了解详情，请参阅“调制/延迟类
型”部分。
. EDIT 1: 转动编辑旋钮
. EDIT 2: 按住 TAP 切换开关，并且转动编辑旋钮
d. TAP switch and LED
This is used to set the speed of the modulation effect or the delay time
of the delay effect. The interval at which you press the TAP switch twice
is assigned as the time.
The LED will blink to indicate the specified speed or time.
If you’ve selected PITCH SHIFTER, the pitch setting will change each time
you press the TAP switch.
If you’ve selected FILTRON, the envelope up/down setting will change each
time you press the TAP switch. The LED will light if Up is selected.
You can edit parameters such as SPEED or PITCH by holding down the TAP
switch and turning the EDIT knob (EDIT 2). For details, refer to
“Mode/Delay types” (p.20).
d. TAP 切换开关和 LED 指示灯
这里用来设置调制效果器的速度，或者延迟效果器的延迟时间。你点击两次 TAP
开关的间隔就会用作被分配的时间。
LED 指示灯会根据相应的速度或者时间进行闪烁。
如果你选择了 PITCH SHIFTER（变调器）
，每次你点击 TAP 开关就会改变音调设
置。
如果你选择了 FILTRON（过滤器）
，每次你点击 TAP 开关就会改变包络的上下设
置。如果选择了上，则 LED 指示灯会被点亮。
