VOX electronics INF-3400, Operating Instructions Manual

Page: 15 / 121

EN - 14 -
PART - 5.
Replacing LED lighting
If your refrigerator has LED lighting contact the help desk as this should be changed by
authorized personnel only.
TRANSPORTATION AND CHANGING OF
INSTALLATION POSITION
Transportation and changing of installation position
• The original packages and foamed polystyrene (PS) can be retained if required.
• During transportation, the appliance should be secured with a wide string or a strong
rope. The instructions written on the corrugated box must be followed while transporting.
• Before transporting or changing the
installation position, all the moving objects
(ie,shelves,crisper…) should be taken out
or fixed with bands in order to prevent them
from getting damaged.
• Carry your fridge freezer in the upright position.
BEFORE CALLING YOUR AFTER SALES SERVICE PART - 6.
If your refrigerator is not working properly, it may be a minor problem, in order to save time
and money, check the following, before calling an electrician.
What to do if your appliance does not operate;
Check that:
• There is no power,
• The general switch in your home is disconnected,
• The socket is not faulty. To check this, plug in another appliance that you know is working
into the same socket.
What to do if your appliance performs poorly,
Check that:
• You have overloaded the appliance ,
• The thermostat setting is in position “1” (if so, set the thermostat dial to a suitable value)
• The doors are closed properly,
• There is no dust on the condenser,
• There is enough place at the rear and side walls.
If there is noise:
The cooling gas which circulates in the refrigerator circuit may make a slight noise (bubbling
sound) even when the compressor is not running. Do not worry this is quite normal. If you
hear any other noises, check that:
• The appliance is level
• Nothing is touching the rear of the appliance.
• The objects on the appliance are vibrating.