VOX electronics GHT631 XL, Operating Instructions Manual

Page: 16 / 139

During installation, please ensure
that isolated cables are used. An
incorrect connection might damage
your appliance. If the mains cable is
damaged and needs to be replaced
this should be done by a qualified
personnel.
Do not use adaptors, multiple sockets
and/or extension leads.
The supply cord should be kept away
from hot parts of appliance and must not
be bent or compressed. Otherwise the
cord may be damaged, causing a short
circuit.
If the appliance is not connected to the
mains with a plug, a multi-pole isolator
switch (with at least 3 mm contact
spacing) must be used in order to meet
the safety regulations.
The appliance is designed for a power
supply of 220-240 V~. If your supply is
different, contact the authorized service
personnel or qualified electrician.
The power cable (H05VV-F) must be of
sufficent length to be connected to the
appliance.
The fused switch must be easily
accessible once the appliance has been
installed.
Ensure all connections are adequately
tightened.
Fix the supply cable in the cable clamp
and then close the cover.
The terminal box connection is placed
on the terminal box.
2.6. Anti-tilting kit
The document bag contains an anti-tilting
kit. Loosely attach the anti-tilting bracket (1)
to the wall using the screw (2) and dowel
(3), following the measurements shown in
the figure and table below. Adjust the height
of the anti-tilting bracket so that it lines up
with the slot on the cooker and tighten the
screw. Push the appliance towards the wall
making sure that the anti-tilting bracket is
inserted into the slot on the appliance.
P ro du ct D im ensions
(W idth X D epth X H eight) (Cm )
A (m m ) B (m m )
60x60x85 309.5 64
15
2.7. Adjusting the feet
Your product stands on four adjustable
feet. For safe operation, it is important that
your appliance is safe and balanced. Make
sure the appliance is level prior to cooking.
H05VV-F 5x1,5mm² 3N~
H05VV-F 3x2,5mm² ~
L3
L2
L1
3 4
5
N
PE
2
1 L
3
4
5
N
PE
2
1