VOX electronics EBB7116, Operating Instructions Manual

Page: 14 / 139

EN - 13
grid lightly with oil to stop foods sticking
and place foods in the centre of the grid.
Always place a tray beneath to catch any
oil or fat drippings. Pre-heating the oven
for about 10 minutes is recommended.
Warning: When grilling, the oven door
must be closed and the oven temperature
should be adjusted to 190
0
C.
Faster Grilling Function:
The oven’s thermostat and warning
lights will be turned on, the grill and upper
heating elements will start operating. The
function is used for faster grilling and for
covering a larger surface area, such as
grilling meats. Use the oven's upper
shelves. Brush the wire grid lightly with
oil to stop foods sticking and place foods in
the centre of the grid. Always place a tray
beneath to catch any oil or fat drippings.
Pre-heating the oven for about 10 minutes
is recommended. Warning: When grilling,
the oven door must be closed and the
oven temperature should be adjusted
to 190
0
C
D o u b l e G r i l l a n d F a n
Function:
The oven’s thermostat and warning
lights will be turned on, the grill and
upper heating elements and fan will start
operating.
This function is used for faster grilling of
thicker foods and for covering a larger
surface area. Both the upper heating
elements and grill will be energised along
with the fan to ensure even cooking.
Use the upper shelves of the oven. Brush
the wire grid lightly with oil to stop foods
sticking and place foods in the centre
of the grid. Always place a tray beneath
to catch any oil or fat drippings. Pre-
heating the oven for about 10 minutes
is recommended.
Warning: When grilling, the oven door
must be closed and the oven temperature
should be adjusted to 190
0
C.
Vap Clean Function
Set your oven function and thermostat
to vap clean function. symbol. Spill 200-
250ml of water (about 1 cup) is stated
into the small tray on the oven base.
VapClean run approximately 20 minutes
and prepare your oven to clean easily.
Use of digital timer
Time Adjustment:
The time must be adjusted before
starting to use the oven. Following the
power supply to the oven, the symbol
(A) and the three “0” on the screen
will begin to flash. Press the (+) and
(-) keys simultaneously. The symbol
will appear on the screen. Also, the
dot in the middle of the screen will
begin to flash. Using the (+) and (-)