13
4.1 USE OF COOKERS CONTAINING GAS
IMMEDIATE Ignition System in Cookers
Some models have immediate ignition system on cookers. You can easily recognize them
via the turning on spark plugs. To operate the system; it is required to press slightly onto
the switch marked with its symbol, as turning the switch of the cooker that you want to turn
on opposite to clockwise.
In order to obtain the most efficiency from the cookers, pay attention to the sizes of
saucepans that you put the on the cookers and the sausepans to have flat bases. Do
not use concave and convex based saucepans. Pay attention to use saucepans that have
sizes determined in figure. If the dishes that have less than 14cm diameter,
use a coffee pot carrier.
Gas Flame Failure Device (FFD) (If Your Product Has This Feature)
Gas flame failure device is used for every flammable gas in order to prevent the gas
leakage by the result of turning on the gas taps by the children randomly or
dying down that may occur by the result of overflowing of liquidover the burners.
Turn the switch opposite to clockwise onwards. This situation will ignite automatically one
after another. After the turning on, when the switch is held on pressed location for
approximately 3 seconds as pressing forward until the point where the switch reaches, the
thermic component senses the cookers flame and opes the gas way. At dying out that
may be because of overflowing of liquid and such reasons, the thermic unit senses the loss
of heat and cuts off the gas way in a time period less than 90 seconds.
PART 4 : USE OF YOUR OVEN
0
12-18 cm
20-22 cm
20-22 cm
22-26 cm
(rapid - Wok burners)
Surely and carefully read the instructions that ore enriched with
pictures for your use of convenience and to be able to get the most
efficiency from your appliance. The signs on the control switches,
states that which cookers are turned on by them. Use your electrical
lighter or match to turn on any cooker containing gas. Press onto the
switch, turn to maximum at the opposite of clockwise. Each cooker can
operate at maximum, minimum, moderate and powers among them.
These positions are shown with maximum and minimum signs apart
from off 0 position on switches. You can adjust to wished location by
turning the switch from off position opposite to clockwise and carrying
it out in a suitable manner to the signs. Also, to turn off the apparatus,
it is required to turn the switch clockwise and until it stops
(It stops at 0 location).
Summary of Contents for 8606106512663
