Installation and Operating Manual
Info Panel Pro
12 V
No. 5330
Info Panel Pro 24 V
24 V
No. 6330
Please read the mounting instructions and operating manual including the safety regulations
completely prior to starting connection and start-up.
Centralized Control and Information Unit for Camper and Boat, Functional Features:
Digital Voltage Display for Starter Battery and Board Battery
Tank Displays for Fresh Water Tanks, Sewage Water Tanks and Feces Tanks (Level Measuring)
Pump Main Switch with LED Pilot Lamp (Water Pump)
Battery Main Switch with LED Pilot Lamp (Equipment-on Check)
Installation:
Choose a well visible and easily accessible location in the living area for installation of the unit. The installation place in the
front panel of the furniture should be chosen in such a way that the contrast of the display be not hindered (sun light).
The small mounting depth of only 12 mm of the electronic system allows flush mounting into commercial furniture boards
to ensure, that an optimum installation place can always be chosen without losing precious storage space.
The clear opening of the furniture cutout should be slightly larger than the assembly dimensions of 176 x 43 mm
to ensure safe alignment of the unit’s front panel. Use the delivered drilling jig for alignment.
The rear cutout opening should be covered with electrically nonconducting material (e. g. plastic plate, poplar
plywood, or similar material) to ensure full utilization of the storage space, which might be located behind
Make all electric connections, place the Info Panel Pro centrically in the cutout and use the delivered screws for fastening.
