Votex B10H, Manual, Page: 29 / 38

7
- switch the blowing mouths into the right position
- Slowly turn the hydromotor to the allowed maximum number of revs .
Take care that the ventilator always can aspirate enough free air and adapt your
driving speed to your experience with the to be blown away materials.
7. MAINTENANCE
A maintenance plan is a minimum condition to be sure of a safe and long use of the
machine.
Besides regularly controlling the oil, greasing and checking for visual damages, you
must control the whole machine without interruption, to see if all parts are functioning
right, and if necessary to carry out repairs before using the machine again.
The following maintenance scheme helps you to warrant a long and safe application. If
the machine is being used very extensively, we additionally recommend to let be
carried out a complete technical control at the end of each season.
7.1 Greasing- and maintenance scheme
ACTIVITIES carry out after: 8
hour
s
30
hour
s
100
hour
s
200
hour
s
start of the
season
Control the oil amount and condition
O O O
Control all fixations
O O O O
Control all protection caps and Hydro-
hose
O O O
Grease all links
O O O O
Renew the oil in the Hydraulic-system
O
6. APPLICATION OF THE MACHINE
The leafblower
B10
H is standardly delivered for assembly in front of tractors or mower
with a hydraulic system, with pumpcapacity between 27.5 - 50 liter/min and 150 bar.
The 27.5 ltr./min is limited bij the flow control value in position 7.
Forestpaths, circuit roads etc. can be blown clean with the blowing mouth in standard
position, reversable blowing.
Only start the machine after you made sure using the machine does not bring danger
to anyone.
6.1 Connecting the machine
After connecting the leafblower as described in the safety instructions (4.2 and 4.3)
you need to carry out a test first to see whether all parts are functioning right. Take
care that, during this test, no materials can be blown away.
6.2 Starting up the machine
After you have convinced yourself there can be blown safely, you start the leafblowing
as follows: