The motion detection feature is used to generate an alarm whenever
movement occurs in the image.
1. Adjust Parameter (see table below for details).
Parameter Object Size
History
Sensitivity
H : High
continuous-loop recording ensures that no critical shot is ever missed
*
The counter will not count up in this mode.
M: Middle
Very small objects
trigger motion
detection
An object that appears in
the region will trigger the
motion detection for a long
period.
Ordinary colored
objects against
ordinary backgrounds
will trigger the motion
detection
L : Low
Only very large
objects trigger motion
detection
An object that appears in
the region will trigger the
motion detection for a very
short period.
Only very bright
objects against a dark
background will trigger
motion detection
2. Plug the GV6200 power adapter into a working electrical outlet.
Aim the motion detector at the field of view you want covered.
3. Insert the SD card into the SD card slot.
NOTE:
Please
carefully
insert the memory card with the front of the card
facing the LED.
.
4.The LED on the back side will show Fo: or Fo-- ; it is asking
“Do you want to format the SD card ? “
You can press [Enter] to format the card or [ Loop] to enable the
recording.
5. While the parameter is set at M or L , counter will track the number of
video files when the device detects any movement occur.
Note: The unit will automatically being to record when it has
been idle for 10 seconds.
5.How to configure Motion Detection:
