1
1
2
3
Fiber Optic Connector, FC/PC or ST/PC
BNC Connector, 75-ohm analog video input (Transmitter)/output (Receiver)
Stand-alone Power supply Connector, DC5V 2A Input.
Panel & Cable Connection
En_3
Installation Instructions:
NOTE1:
Digital video optic transmitter and receiver should be used in pairs, one is
Transmitter
(LED is red)
, the other is
Receiver (LED is green)
.
NOTE2:
Avoid simultaneously connecting video signals to both the front BNC and rear BNC of the
same channel. Also, since each video channel is factory terminated to 75 ohm, unused BNCs
should not be used for loop-through video connections.
4
Audio Connector, Terminal Block, analog audio input (Transmitter)/output (Receiver)
DC5V
1 2 3 4
DATA
3
4
POWER
OPTIC
EXT
FRONT PANEL
REAR PANEL
EXT2
D1
D2
FTX
1
V1
V2
EXT1
C+ C- D+ D-
None
A+ A- B + B-
V1
2
None
NOTE: AUDIO SIGNAL AND IMPEDANCE MODE
1) Audio Signal:
The audio is
Mono Audio
in default, can support
Stereo audio
, but you
should consult for us before the order.
2) Impedance Mode:
The audio is
unbalanced mode
in default, can support 600 ohm
balanced audio
, but you should consult for us before the order
