TI
G
ER
260
87
TI
G
ER
260
86
Winding up the connecting cable
The cable can be wound up without the
need of pressing an additional button.
You just have to slightly pull at the
cable (2.5 cm).
It will then wind up automatically.
(FIGURE 14)
Storing
In order to safely store your
Tiger 260
and
save place you can hook the electrical
suction tube into a holding device located
under the appliance.
(FIGURE 15)
FIGURE 14
FIGURE 15
Switching on and off
After your
Tiger 260
has been connected to
the mains, the green ready-light on the
appliance will come on
(FIGURE 11)
.
The
Tiger 260
is switched on and off by
means of the sliding switch on the electronic
suction hose. The sliding switch makes sure
that you can easily and safely select one of
the four power performance settings. Select
the desired power performance setting
between “
A
and
3
”.
(FIGURE 12)
The Electronic Brush will automatically be
switched on or off in accordance with the
setting selected. Performance setting “
A
” is a
particularly low performance setting for
loose rugs and carpets.
(FIGURE 13)
Performance Type of floor setting
A
rugs, carpets
1
rugs, carpets, fitted carpets
2
heavily soiled, fitted carpets
3
hard floors, raised area,
special fitted carpets (needled felt,
loop-woven goods)
Always switch off the
Tiger 260
and
other accessories before changing
accessories, cleaning or doing any
maintenance, and remove the pug from the
mains socket. Only unplug the appliance by
pulling on the mains plug, and never by
pulling on the mains cord.
FIGURE 11
FIGURE 12
FIGURE 13
Tiger 260
Assembly & Use
Assembly & Use
Assembly & Use
