Inserting new filter bags
Press the
Dovina
fragrance chip into the
new filter bag plastic plate.
(FIGURE 26)
Small parts, like the
Dovina
fragrance
chips, must be kept out of children’s reach.
Insert the filter bag plastic plate starting
with the bottom first, ensuring the two
small plastic “tabs” go over the green base
plate of the
Kobold VK 140
.
(FIGURE 27)
Then press the top of the filter bag plastic
plate into the metal clasp until you hear a
click.
(FIGURES 28 AND 29)
FIGURE 26
FIGURE 27
FIGURE 28
FIGURE 29
V
K
140
29
V
K
140
28
Ensure both filter bag corners are tucked
within the green supports.
(FIGURE 30)
Finally, close the filter cassette back onto
the motor head ensuring that it clicks firmly
into place.
(FIGURE 31)
The
Kobold VK 140
is fitted with a special
system that prevents the filter cassette from
closing if the filterbag is not present, is not
corrected inserted or is not the filter
suitable for the appliance.
If the filter cassette does not close easily,
do not force it and check if you have
correctly inserted the
Premium Filterbag
FP 40
.
During a long period of usage, if the
ambient temperature is high or vacuuming
with a exhausted filterbag, the
Kobold VK
140
may switch to a higher performance
setting due to overheating and therefore no
regulation of the suction power is possible.
In this situation an air vent opens
automatically and allows air into the interior
of the motor.
This significantly reduces the suction
performance power and the
Kobold VK 140
becomes louder. If the filterbag is not
exhausted then examine the suction canal
of the
Kobold VK 140
and of the attached
appliance or nozzle.
Then remove any blockage and/or change
the filterbag if necessary. Only after the
cooling of the motor the performance
setting can be regulated again.
Do not reuse filter bags. Due to the
blocked pores, the
Kobold VK 140
loses
performance and can overheat.
FIGURE 30
FIGURE 31
click
Maintenance
Maintenance
