Troubleshooting
Technical Specifications
14
ENGLISH
Problem
Solution
Little or no
solution
coming out
Repeat 5 to 10 cycles to fill the tubes with solution.
Check the tank is not empty.
Check the batteries are not low.
Check the vent hole on top of the seal is not blocked.
Check the unit is turned on.
Clean the nozzle.
Sensor not
reacting to
hands
Check the unit is turned on.
Check there is nothing blocking the sensor.
Clean the sensor located by the nozzle.
Check the batteries are not low.
Characteristic
Value
Batteries
4 AAA (Not included)
Capacity
400 ml
Flow Rate
1 ml/use
Dimensions
21.4 cm x 11.6 cm x 7 cm
Summary of Contents for VortDispenser Go
Page 17: ......
