43
ENGLISH
9.3 Remote interface dimensions and installation
The following drawing illustrates the dimensions of the remote electromechanical interface:
Wall installation (with dowels and fixing screws):
1. Open the front door lock on the control unit using a key.
2. Open the front door, lifting the opening handle upward.
3. Unscrew the 4 Phillips-head screws positioned at the corners.
4. Remove the front control unit casing, lifting upward.
5. Make 4 holes in the wall with a diameter suitable for the dowel, following the drilling diagram (fig.21). We recom-
mend using dowels with diameter 5.0 mm.
6. Insert the dowels in the holes made on the wall.
7. Fix the rear electromechanical control unit casing to the wall with 4 screws. We recommend using flat countersunk
head screws.
8. Re-position the front control unit casing and fix it using the 4 Phillips-head screws removed in point 3.
9. Perform the electrical connections on the control unit as illustrated in the next chapter, making sure that there is no
voltage on the central connection panel on the machine.
16
17
