Vortice VORT HR 200 BP, Instruction Booklet

Page: 39 / 52

39
No Frost
The frost protection procedure is carried out automatically by the device when necessary. A blocking signal will be
generated if the procedure does not work (pre-heater with temperature too low). The system will remain inactive for
an hour; after which, the device will automatically reset the error, and the cycle will reactivate and repeat from the
beginning.
Setup
You can access the Date and Time setting with this option
Set the Date and Time as follows:
1. search for the variable you wish to change, pressing
or ;
2. select the variable, pressing ;
3. search for the desired value, pressing or ;
4. store the selected value, pressing ;
5. return to point 1 and so on.
ENGLISH
ALARM
NO FROST
WAIT
1 HOUR
MAIN MENU
USE MENU
ALARM
SETUP
MAIN MENU
USE MENU
ALARM
SETUP
SETUP
DATE&HOUR
SETUP
DATE&HOUR
DATE&HOUR
FRIDAY
dd: 14
yy: 18
hh: 08
mm: 23