Vortice UVLOGIKA SYSTEM, Instruction Booklet

Page: 14 / 52

14
• Before carrying out any type of cleaning or maintenance operation, turn the appliance off and turn the main power
switch off to disconnect it from the power supply.
• Should the appliance be dropped or suffer a heavy blow, have it checked immediately by VORTICE.
• If the appliance does not function correctly or develops a fault, turn it off and contact VORTICE immediately.
• Ensure that only genuine original VORTICE spares are used for any repairs. If the power supply cable is damaged,
it must be replaced by the manufacturer or by an authorized VORTICE Technical Assistance Center, in order to
prevent any risk.
• Switch off the appliance at the main switch: a) if the appliance does not function correctly; b) before cleaning the
outside of the appliance, c) if the appliance is not to be used for long periods of time.
• The light source contained in this appliance must only be replaced by the manufacturer or its assistance service
or by equally qualified personnel
• It is not necessary to make any specific adjustments since the devices operate at nominal frequencies without a
preliminary setting.
• To increase the duration of the lamp, it is advisable to provide a timer during installation which turns off the product
after the chosen operating time sufficient to sanitize the environment, especially in the case of unsupervised
environments.
Photobiological safety
The device complies with EN 62471:2006 on the photobiological safety of lamps.
The lamp belongs to risk group 3 and should not be used for general
lighting.
WARNING UV-C emitted from this product.
Avoid eye and skin exposure to unshielded
product. Follow installation instructions and
user manual.
UV-C RISK GROUP 3
ATTENZIONE UV-C emessi da questo prodotto.
Evitare l’esposizione di occhi e pelle verso il
prodotto non schermato. Seguire le istruzioni di
installazione e il manuale d’uso.
UV-C GRUPPO DI RISCHIO 3
ENGLISH