ENGLISH
P2, used to program two periods of operation per day,
each with a start time, an end time and a fan speed.
The user can allocate a different profile to each day of
the week.
-
HA
: settings for operation in HA mode: available only on
appliances equipped with HA module, and only if
operation of the main system with time profiles has not
been enabled.
-
SERV
: service (option available only to the installer)
PROF option
Selecting PROF by pressing SET set time profiles.
The parameters are
:
- En (Enable): possible values are:
ON: enables operation with profiles (and as noted
above, automatically disables any possibility of
operation in HA mode)
OFF: disables operation with profiles.
If EN ON has been selected, the following parameters
are also enabled:
- ST: start time, profile P1 interval
- END: end time, profile P1 interval
- SP: speed, profile P1: possible values are 1, 2, 3
- ST1: start time, profile P2 interval 1
- EN1: end time, profile P2 interval 1
- SP1: speed, profile P2 interval 1: possible values are 1,
2, 3
- ST2: start time, profile P2 interval 2
- EN2: end time, profile P2 interval 2
- SP2: speed, profile P2 interval 2: possible values are 1,
2, 3
- MON: allocation of profile to Monday: possible values
are P1 and P2
- TUE: allocation of profile to Tuesday: possible values
are P1 and P2
- WED: allocation of profile to Wednesday: possible
values are P1 and P2
- THU: allocation of profile to Thursday: possible values
are P1 and P2
- FRI: allocation of profile to Friday: possible values are
P1 and P2
- SAT: allocation of profile to Saturday: possible values
are P1 and P2
- SUN: allocation of profile to Sunday: possible values
are P1 and P2
HA Option
This option is available only on models equipped with HA
module, and only if operation of the main system with
time profiles has not been enabled. Selecting HA by
pressing SET, the settings for HA operating mode are
accessed. The parameters are:
- En (Enable): possible values are:
PROF: enables HA mode with profiles
ON: enables HA mode continuously
OFF: disables HA mode
HOL: enables HOLIDAY mode: two hours antibacterial
operation per day, two hours refresh, 20 hours stand-
by.
If EN PROF has been selected, the following parameters
are also enabled:
- ST: start time, profile P1
- EN: end time, profile P1
- ST1: start time, profile P2 interval 1
- EN1: end time, profile P2 interval 1
- ST2: start time, profile P2 interval 2
- EN2: end time, profile P2 interval 2
- MON: allocation of profile to Monday: possible values
are P1 and P2
- TUE: allocation of profile to Tuesday: possible values
are P1 and P2
- UED: allocation of profile to Wednesday: possible
values are P1 and P2
- THR: allocation of profile to Thursday: possible values
are P1 and P2
- FRY: allocation of profile to Friday: possible values are
P1 and P2
- SAT: allocation of profile to Saturday: possible values
are P1 and P2
- SUN: allocation of profile to Sunday: possible values
are P1 and P2
esc
set
By-Pass
/ °C
1
2
3
4
5
6
7
FILT
P2
Prg
24
2
24
P1
HA
esc
set
By-Pass
/ °C
1
2
3
4
5
6
7
FILT
P2
Prg
25
2
25
P1
HA
24
