14
Maintenance and cleaning
Always unplug the unit from the mains before carrying out any maintenance or cleaning of the unit.
Always unplug the unit from the mains before carrying out any maintenance or cleaning of the unit.
CLEANING
Use a soft cloth to clean the unit.
Don't ever use volatile chemicals, gasoline, detergents, chemically treated clothes, or other cleansing solutions.
These all could possibly hurt the cabinet.
CLEANING THE FILTER
This dehumidifier is equipped with 2 filters.
Fig.4
a) Grille
b) Washable plastic air filter
c) Active carbon filter
ANTI DUST FILTER
Extract the filter holder, remove the active carbon filter.
Use a vacuum cleaner or tap the filter lightly for easy cleaning. If the filter is particularly dirty, rub it with warm
water. Make sure the filter is completely dry before replacing.
Do not expose the filter to sunlight.
ACTIVE CARBON FILTER
(for capturing the particles of dust suspended in the air and preventing the production of bacteria.)
The active carbon filter placed under the anti-dust filter is not washable. Its life span is variable and depends on
the ambient conditions where the unit is used. The filter should be checked periodically and replaced if
necessary.
STORAGE
If the appliance remain unused for a long time:
Turn it Off, unplug and tidy power cord.
Completely empty the water tank and wipe it clean.
Cover the unit and store it unexposed to direct sunlight.
Trouble Shooting
THE UNIT DOES NOT OPERATE:
Is the unit plugged in?
Is the house electricity on?
Is the room temperature below 5oC or above 32oC? If so, then it is out of the working range of the unit.
make sure to have press the ON/OFF button.
Check the water tank is properly positioned and it is not full.
Make sure the air inlet and outlet are not obstructed.
THE UNIT SEEMS TO DO NOTHING:
Is the filter dusty, contaminated?
Is the air inlet or outlet blocked up?
Is the room humidity already quite low?
THE UNIT SEEMS TO DO LITTLE:
Are too many windows or doors open?
Is there something in the room producing lots of humidity?
THE UNIT IS TOO NOISY:
Check whether the unit is positioned on a level surface.
THE UNIT IS LEAKING:
Make sure the unit is in good shape.
ENGLISH
