Vortice DEUMIDO M10, Instruction Booklet

Page: 16 / 24

Drainage
While the water tank is full, the compressor will stop for self-protection and the
water full indicator will turn into red.
To move the water tank, pull it out squarely from the unit.
After empting the water tank, place the water tank into space. Make sure it is
properly positioned, in order for the 'water full' sign to go out and your
dehumidifier is operating.
NOTE: in case, the water tank has not been positioned well, the water full
indicator will turn into red.
When the dehumidifier is operated at very high humidity levels, the water tank will
require more frequent drainage. In this situation, it may be more convenient to set
the unit up for continuous drainage with the following procedure:
1. Pull out the water tank (fig.5)
2. Connect the drain hole with water tube of inner diameter: 11mm. (The water
tube is not supplied with the unit).
3. Ensure the water will always drain away freely and the tube will remain in right
place.
NOTE : in very cold weather conditions,
precautions should be taken to prevent the water
tube from freeing.
4. Put the water tank back to its position (fig.6)
16
ENGLISH
5 5
6 6