Vortice Caldopro Plus, Instruction Booklet

Page: 12 / 45

• Before disconnecting the appliance from the power
supply, leave it running for a few minutes in
Ventilation mode.
• Do not make modifications of any kind to this
appliance.
• Pay special attention when using it in rooms that are
not manned.
• Regularly inspect the appliance for visible defects. If
the appliance does not function correctly, do not use
it and contact Vortice* immediately.
• Should the appliance be dropped or suffer a heavy
blow, have it checked immediately by Vortice*.
• If the appliance does not function correctly or
develops a fault, turn it off, disconnect the plug from
the power supply and contact Vortice* immediately.
Ensure that only genuine original Vortice spares are
used for any repairs.
• Never position the appliance directly under a power
socket.
• The electrical safety of this appliance is only
guaranteed when it is correctly installed and earthed
according to the latest issue of the I.E.E.Wiring
Regulations. If in doubt, have a qualified electrician
perform a thorough check.
• Check that the electrical power supply/socket
provides the maximum electrical power required by
the appliance.
• If the power socket is of a different type to the plug
fitted on the appliance, ask a qualified technician to
replace the plug with one of the right type. Do your
best to avoid the use of adapters, multiple sockets
and/or extension leads; if necessary, first make sure
that they comply with current safety regulations and
check that the maximum allowed power is
compatible with the values on the appliance's rating
plate. Any extension leads must be as short as
possible, to prevent them from overheating and
triggering the thermal cut-out devices.
• Do not pull on the power cable, do not place it near
heat sources, and always uncoil it completely to
prevent dangerous overheating. If the cable or the
power plug are damaged, take the appliance to an
authorised Vortice* service centre for replacement.
• Do not cover the power cable, to avoid any risk of
overheating or damage; at the same time, make sure
it is placed so that it does not create an obstacle.
• A limited increase in temperature in the power cable
and plug during use of the appliance is to be
considered normal; however, if the phenomenon
increases to the point that they become too hot to
touch or start to deform, contact Vortice*
immediately.
• Never place the power cable in front of the heating
elements.
• Always keep the appliance in an upright position.
• When the appliance is not being used, switch it off
and disconnect the plug from the power supply.
• Before cleaning the appliance in any way, switch it
off and then disconnect the plug from the power
supply.
• Do not immerse the appliance in water.
• Do not insert anything into the appliance.
• Keep the appliance's intake and outlet grilles
2a 2a
NO
T O
K
OK
NOT OK
2 2
60 cm 60 cm
60 cm
180 cm
12
ENGLISH
Caution:
this symbol indicates that care must
be taken to avoid damaging the appliance
!