5
• Do not use this appliance for functions other than
those described in this booklet.
• After removing the appliance from its packaging,
ensure that it is complete and undamaged. If in
doubt contact a professionally qualified technician
or Vortice*. Do not leave packaging within the
reach of children or infirm persons.
• Store the appliance out of reach of children and
infirm persons after disconnecting it from the power
supply.
• Certain fundamental rules must be observed when
using any electrical appliance: a) Never touch
electrical appliances with wet or damp hands.
b) Never touch electrical appliances while barefoot.
c) Never allow children or infirm persons to operate
appliances unattended.
• Do not operate the appliance where inflammable
vapours are present (alcohol, insecticides, petrol,
etc.).
• To conform to applicable standards, the bottom
edges of the fan blades must be at a height of at
least 2.30 metres or more from the floor (fig.1).
• Any modifications made to the standard factory
fittings automatically invalidates the warranty and
absolves the manufacturer from all liability.
• Do not make modifications of any kind to this
appliance.
• Do not expose this appliance to the weather (rain,
sun, etc.)
• Install the appliance at an adequate distance from
walls and other objects, etc..
• Regularly inspect the appliance for visible defects. If
any faults are found, do not operate the appliance
but contact Vortice* immediately.
• If the appliance does not function correctly or
develops a fault, contact Vortice* immediately and
ensure that only original Vortice spares are used for
any repairs.
• Should the appliance be dropped or suffer a heavy
blow, have it checked by Vortice* immediately.
• This appliance must be installed by a professionally
qualified electrician.
• Ensure that the electrical system to which the
appliance is connected conforms to applicable
standards.
• The appliance must be connected to an efficient
earthing system in accordance with applicable
electrical safety standards. If in doubt, ask a
qualified electrician to check your system.
• The electrical power supply/socket to which the
appliance is to be connected must be able to
provide the maximum electrical power required by
the appliance. If it cannot do so, arrange for a
professionally qualified electrician to make the
necessary modifications.
• Use a multi-polar switch with minimum contact gaps
of 3 mm to install the appliance.
• Switch off the appliance at the installation's main
switch: a) if the appliance does not function
correctly; b) before cleaning the outside of the
appliance, c) if the appliance is not to be used for
any length of time.
Warning:
this symbol indicates precautions that must be taken to avoid injury
!
DESCRIPTION AND OPERATION
ENGLISH
WARNING - CAUTION
The product you have purchased is a reversible
ceiling fan. You can also install an additional light kit
with two energy saving bulbs of maximum 15 W each
with Edison E27 fitting. The other kit uses a
maximum 150 W incandescent light bulb with Edison
E27 fitting. An infrared remote control is also
available.
Caution:
this symbol indicates precautions that must be taken to avoid damaging the appliance.
!
*(or an authorised Service Centre if you are outside the UK-Ireland territory)
